What you get
—Shell, services, before closing up: every stage as its own dated state
—Compare: two states of the same room side by side, before and after, in the same tour
—Measurements straight from the model, for handover and variations
—Point cloud as E57 or PLY, to check against the BIM model in your own software
—Access by link for client, planner and trades, without an account
—LiDAR reaching 0.2 to 25 m, deviation under ±20 mm at 10 m
—Point cloud as .e57 and .ply, for checking against the BIM model
Technical data: Realsee Galois M2.
* Travel within Dortmund and NRW included.